ExtensionSubstancePolymer_Repeat

R5: Specifies and quantifies the repeated units and their configuration (new)

activeExtensions for Using Data Elements from FHIR R5 in FHIR R40.1.01 context

R5: `SubstancePolymer.repeat` (new:BackboneElement)

Metadata

hl7.org/fhir
Canonical URL
http://hl7.org/fhir/5.0/StructureDefinition/extension-SubstancePolymer.repeat
ID
ext-R5-SubstancePolymer.repeat
Name
ExtensionSubstancePolymer_Repeat

Context (1)

This extension can be used on the following elements:

elementBasic
PathCard.TypeFlagsDescription
Extension0..*
R5: Specifies and quantifies the repeated units and their configuration (new)
extension0..*
:averageMolecularFormula0..1
R5: A representation of an (average) molecular formula from a polymer (new)
url1..1
fixed: averageMolecularFormula
value[x]0..1
string
A representation of an (average) molecular formula from a polymer
:repeatUnitAmountType0..1
R5: How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average) (new)
url1..1
fixed: repeatUnitAmountType
value[x]0..1
CodeableConcept
How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average)
:repeatUnit0..*
R5: An SRU - Structural Repeat Unit (new)
extension0..*
:unit0..1
R5: Structural repeat units are essential elements for defining polymers (new)
url1..1
fixed: unit
value[x]0..1
string
Structural repeat units are essential elements for defining polymers
:orientation0..1
R5: The orientation of the polymerisation, e.g. head-tail, head-head, random (new)
url1..1
fixed: orientation
value[x]0..1
CodeableConcept
The orientation of the polymerisation, e.g. head-tail, head-head, random
:amount0..1
R5: Number of repeats of this unit (new)
url1..1
fixed: amount
value[x]0..1
integer
Number of repeats of this unit
:degreeOfPolymerisation0..*
R5: Applies to homopolymer and block co-polymers where the degree of polymerisation within a block can be described (new)
extension0..*
:type0..1
R5: The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio (new)
url1..1
fixed: type
value[x]0..1
CodeableConcept
The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio
:average0..1
R5: An average amount of polymerisation (new)
url1..1
fixed: average
value[x]0..1
integer
An average amount of polymerisation
:low0..1
R5: A low expected limit of the amount (new)
url1..1
fixed: low
value[x]0..1
integer
A low expected limit of the amount
:high0..1
R5: A high expected limit of the amount (new)
url1..1
fixed: high
value[x]0..1
integer
A high expected limit of the amount
url1..1
fixed: degreeOfPolymerisation
value[x]0..0
:structuralRepresentation0..*
R5: A graphical structure for this SRU (new)
extension0..*
:type0..1
R5: The type of structure (e.g. Full, Partial, Representative) (new)
url1..1
fixed: type
value[x]0..1
CodeableConcept
The type of structure (e.g. Full, Partial, Representative)
:representation0..1
R5: The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new)
url1..1
fixed: representation
value[x]0..1
string
The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF
:format0..1
R5: The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new)
url1..1
fixed: format
value[x]0..1
CodeableConcept
The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF
:attachment0..1
R5: An attached file with the structural representation (new)
url1..1
fixed: attachment
value[x]0..1
Attachment
An attached file with the structural representation
url1..1
fixed: structuralRepresentation
value[x]0..0
url1..1
fixed: repeatUnit
value[x]0..0
url1..1
fixed: http://hl7.org/fhir/5.0/StructureDefinition/extension-SubstancePolymer.repeat
value[x]0..0