DICOM Module
Generic Implant Template Mating Features Module
- Attributes
- 20
- Required (Type 1 / 1C)
- 18
- Source
- PS3.3 §C.29.1.4
Overview
specifies the Attributes of the Generic Implant Template Mating Features Module. This Module adds coordinate systems that can be utilized to geometrically constrain mating of Implant Templates when planning the implantation of a modular implant.
Attributes
Type: 1 required (non-zero), 1C required when condition met, 2 required (may be zero-length), 2C conditional, 3 optional.
| Attribute | Tag | Type |
|---|---|---|
| Mating Feature Sets Sequence | (0068,63B0) | 3 |
| Mating Feature Set ID | (0068,63C0) | 1 |
| Mating Feature Set Label | (0068,63D0) | 1 |
| Mating Feature Sequence | (0068,63E0) | 1 |
| Mating Feature ID | (0068,63F0) | 1 |
| 3D Mating Point | (0068,64C0) | 1C |
| 3D Mating Axes | (0068,64D0) | 1C |
| 2D Mating Feature Coordinates Sequence | (0068,6430) | 1C |
| Referenced HPGL Document ID | (0068,6440) | 1 |
| 2D Mating Point | (0068,6450) | 1 |
| 2D Mating Axes | (0068,6460) | 1 |
| Mating Feature Degree of Freedom Sequence | (0068,6400) | 3 |
| Degree of Freedom ID | (0068,6410) | 1 |
| Degree of Freedom Type | (0068,6420) | 1 |
| 2D Degree of Freedom Sequence | (0068,6470) | 1C |
| Referenced HPGL Document ID | (0068,6440) | 1 |
| 2D Degree Of Freedom Axis | (0068,64F0) | 1 |
| Range of Freedom | (0068,64A0) | 1 |
| 3D Degree Of Freedom Axis | (0068,6490) | 1C |
| Range of Freedom | (0068,64A0) | 1C |